AeroStab-S

ggs Stabilizer Lifts
Gyro Stabilization Mounts
Gyro Stabilization Mounts have a wide range of applications, for various Sensors and types of Camera. This makes our Mounts unique.
Gyro Mounts are used for LiDAR Systems, Airborne Cameras and Multi Spectrometer Sensors.
The new Generation all Digital Gyro Stabilizer Mounts can level nearly every airborne sensor to compensate for aircraft movement (roll, pitch and yaw).
The Vibration Isolation System can be easily adapted to specific sensor weight.
MRR Global Technologies is sales, service and support center for SOMAG Stabilizers.
PRODUCT DETAIL

Product
AeroStab-S

Download PDF

AeroStab-S

Fully compensating three axis stabilizer for DSLR and medium format cameras.

AeroStab-S is the third generation of our full compensating stabilizer designed for high-end digital SLR cameras and mid-format cameras.

AeroStab-S Specs

AeroStab-S is the third generation of our fully compensating stabilizer designed for high-end digital SLR cameras and mid-format cameras. AeroStab-S is optimized for working with the AeroTopoL Flight Management System, but is also operable in a stand-alone mode and with other FMS applications, using an open serial interface. AeroStab-3 includes a high quality GPS-Vector board that enables precise positioning with 10 Hz refresh rate and true-heading determination. The IMU itself is used to measure roll and pitch angles. All generations of AeroStab-S mounts are able to trigger the camera at the image centers that are designed in the AeroTopoLFMS and to use the event signal to read the orientation parameters exactly at the mid-exposure pulse.

Better still is our innovative solution that achieves full heading compensation in combination with our AeroTopoLFMS. Stepper motors correct the camera orientation in real-time with a speed of 10°/sec on the roll and pitch axes. The improved model-based firmware updates continuously and rapidly for fast and smooth compensation of up to +-20 degree for roll, pitch and heading.

AEROSTAb-S FEATURES

  • GPS/IMU Integrated
  • Open Interface Format to FMS
  • Optimized for AeroToPol
  • Works with most Cameras
  • Perfectly adjusted for Rollei Metric AIC
  • Release and Event Control
  • Low Power Consumption
  • Compact
  • Easily Installed
  • Full Heading Compensation
  • CameraControl